{"product_id":"victron-smart-bms-cl-12-100-batterie-management-system-fur-lithium-batterien","title":"Victron Smart BMS CL 12\/100 - Battery Management System for Lithium Batteries","description":"\u003ch2\u003e Victron Battery Management System 12\/100: BMS for lithium-ion smart batteries\u003c\/h2\u003e\n\n\n \u003cp\u003eThe Smart BMS CL 12\/100 is a battery management system for intelligent lithium iron phosphate (LiFePO4) batteries from Victron. It was specifically developed for 12V systems with a 12V generator.\u003c\/p\u003e\n\n\n\u003cp\u003e The BMS CL 12\/100 monitors and protects \u003cstrong\u003eeach\u003c\/strong\u003e individual battery cell within the battery (or battery bank) and switches off the generator, charging sources or DC loads in case of low battery voltage, high battery voltage or overtemperature.\u003c\/p\u003e\n\n\n\u003cp\u003e The dedicated generator input provides current limiting and one-way traffic from the generator to the battery, allowing any size generator (and starting battery) to be safely connected to the Smart Lithium battery or batteries.\u003c\/p\u003e\n\n\n\u003cp\u003e The BMS is also equipped with a remote on\/off port to turn off the BMS (and the system) via a remote switch, as well as a pre-alarm contact to provide a warning signal before the BMS disconnects the batteries from the system.\u003c\/p\u003e\n\n\n\u003cp\u003e\u003cbr\u003e\n \u003cstrong\u003eAlternator and battery protection\u003c\/strong\u003e\u003cbr\u003e \nThe input current is electronically limited to approximately 90% of the fuse rating. A 100 A fuse, for example, therefore limits the input current to approximately 90 A.\u003cbr\u003e\n Choosing the right fuse will:\u003c\/p\u003e\n\n\n\u003cul\u003e\n\n\u003cli\u003e a. Protect the LFP battery from excessive charging current (important for a low-capacity LFP battery).\u003c\/li\u003e\n\n\u003cli\u003e b. Protect the alternator from overload in case of a high capacity LFP battery bank (most 12V alternators overheat and fail if running at maximum power for more than 5 minutes).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003cp\u003e\u003cbr\u003e\n \u003cb\u003eProtection of the starter battery\u003c\/b\u003e\u003cbr\u003e\n This function is similar to that of a Cyrix battery combiner or Argo FET battery isolator. Current can only flow to the LFP battery when the input voltage (= voltage at the starter battery) exceeds 13 V. And no current can flow back from the LFP battery to the starter battery, thus preventing potential damage to the LFP battery due to excessive discharge.\u003c\/p\u003e\n\n\n\u003cp\u003e \u003cstrong\u003eRemote on\/off input\u003c\/strong\u003e\u003cbr\u003e \nThe remote on\/off input controls the charging process via the alternator. When off, charging via the alternator is disabled, while the BMS functionality remains active, allowing all loads and chargers to continue operating regardless of the state of the remote input. When the \"System On\/Off Switch\" is activated via VictronConnect, the BMS functionality is also disabled. It consists of two terminals: Remote L and Remote H. A remote on\/off switch or a relay contact can be connected between H and L. Alternatively, terminal H can be connected to battery positive or terminal L to battery negative.\u003c\/p\u003e\n\n\n\u003cp\u003e\u003c\/p\u003e\n\n","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":55769446482265,"sku":"300-2018","price":123.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9436\/8857\/files\/smartbms-12v-100a-topgif-322976.gif?v=1761403960","url":"https:\/\/b2bshop.wattstunde.de\/en\/products\/victron-smart-bms-cl-12-100-batterie-management-system-fur-lithium-batterien","provider":"Wattstunde | B2B Shop","version":"1.0","type":"link"}